SCREAMING SHOCKED YELLOW

Description PC1214 Screaming Shocked Yellow CHEMISTRY POLYESTER TGIC A REGULAR CURE SCHEDULE 375F / 20 MIN MIN RANGE 356F / 20 MIN MAX RANGE 400F / 15 MIN RECOMMENDED THICKNESS 2.5-3.5 mils PENCIL HARDNESS H SPECIFIC GRAVITY 1.2-1.8 g/cm8 THEORETICAL COVERAGE 51.5 ft2 /lb at 2.5 mils PENCIL HARDNESS 2H minimum GLOSS LEVEL (60°) 80-95 SALT SPRAY 1,000 hours BALL IMPACT 20 in/lb SDS Sheet info # #6A – Polyester TGIC (Group A) SDS link https://emeraldcoatings.com/sds-sheets/ This Product is transparent and will show the base coat through the finish.  It is recommended to spray over a metallic silver or chrome powder. This can also be used over polished surfaces with out a base coat.  Applying over a polished surface will have the highest shine, however applying over polished or chrome surfaces may be more prone to chipping.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Due to the bright pigments used in this products, the  UV stability is reduced in comparison to other candy colours.  This will also be more prone to areas with lower film build.   Fading may occur when used in areas with high UV exposure.