RAL 1003 SIGNAL YELLOW (TGIC FREE VERSION)

Description FORMULATION CHANGE **As of Feb 27th 2023, this colour has changed,  HHA TGIC Free formulation.  Do not mix this powder with previous batches. RAL 1003 powder coaiting – Signal Yellow Color Description: RAL 1003 – Signal Yellow is a vibrant, attention-grabbing color. This bright yellow tone is often used for high-visibility applications, such as safety equipment, traffic signs, and machinery. It offers exceptional visibility and is widely favored in industrial and automotive environments where clarity and safety are key. Pantone Match: Closest match to Pantone 116 C (a bright, intense yellow with a similar high-visibility tone). ral1003a ral1003a (NEW TGIC FREE VERSION, do not mix with old version) CHEMISTRY HAA POLYESTER TGIC FREE REGULAR CURE TEMP 375F/10 MIN MIN TEMP 350F/15 MIN MAX TEMP 400F/7 MIN RECOMMENDED THICKNESS 3.5-4.5 MILS PENCIL HARDNESS 2H SPECIFIC GRAVITY 1.58 ± 0.05 THEORETICAL COVERAGE 122 ft /lb/mil PENCIL HARDNESS 2H minimum GLOSS LEVEL (60°) 85 /- 3 SALT SPRAY 1,000 hours BALL IMPACT 160 in/lb SDS Sheet info # #15 HAA POLYESTER TGIC FREE SDS link https://emeraldcoatings.com/sds-sheets/ HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION.  WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection.   When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings.