OGF Light Grey Primer
$ 11.59
Description OUTGAS FORGIVING ZINC FREE LIGHT GREY PRIMER THAT LAYS DOWN NICE AND SMOOTH. EPOXY/POLYESTER HYBRID ZINC-FREE OUT-GASSING FORGIVING PRIMER PC4000 OGF Light Grey Primer CHEMISTRY Epoxy REGULAR CURE TEMP 375F 6-12 MIN MIN TEMP 338F 9-17 MIN MAX TEMP 400F 5-10 MIN RECOMMENDED THICKNESS 2.5 PENCIL HARDNESS NA SPECIFIC GRAVITY 1.6 g/cm3 THEORETICAL COVERAGE 51.5 ft2 /lb at 2.5 mils PENCIL HARDNESS 2H minimum GLOSS LEVEL (60°) NA SALT SPRAY 1,000 hours BALL IMPACT NA SDS Sheet info # #11 – Epoxy/polyester Hybrid SDS link https://emeraldcoatings.com/sds-sheets/ OUTGAS FORGIVING ZINC FREE LIGHT GREY PRIMER EPOXY/POLYESTER HYBRID ZINC-FREE OUT-GASSING FORGIVING PRIMER. *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings.
